I had a problem with my Shifter Cable going over the top of this and one other crossmember
and then fouling on the Fanbelt under the engine.
So to overcome this problem I thought,fit a pipe at an angle through the crossmember and large enough
for the cable to fit through, so this is what I came up with.
the opposite view showing the angle from the front.
as a result of doing this the cable now has a nice straight line from shifter to under the engine fan belt.
problem solved
Here you see the cable running through the crossmember, this crossmember is for the Bed Lock Down, you can see the other crossmember it went over above it.