My COE Page 451
Back
To page 452

Managed to get the RH Mudflap in place, one less job !

I had bought the brake drum and hubs about 12 years ago but
had never fitted the axles,
so I was quite disappointed to find that at least half the
7/16" Threads were stripped
on both sides !Grrr, so I did the only thing I could do,
7/16" is very close to 11mm
And I had quite a few 12 mm SHCS so I tapped all the holes
out to 12mm.
I would like to find some better hubs though, one day !