Denny Olson from "Streetrods by Denny Inc."
Enumclaw, Washington

Back                                                                                                                              To next page
Looks like Cab metal work has just about been completed

Time to fit it onto the Chassis
  I used a 90 degree bell crank, brake pedal, booster, & master cylinder from a 1970's dodge van.
 I lowered the cab down over the motor and suspension until I liked the look and made body mounts.

I scratch built the rest of the frame and tilt bed.
 Fortunately the GM motor homes from the 1970's were front wheel drive and used the same Toronado
suspension with 1 ton hubs and brakes. I was able to install those hubs and brakes on the passenger car spindles.