I started building the frame gussets.since I always seem to overkill everything, I thought "why not this too"
The plates are 1/4" thick and weigh about 30 pounds each, I will tig weld the flange onto the bottom edge, that will be good practice for me.
A new 2" diameter tubular style engine cradle will be bolted to the inside of the gussets with a mounting plate and four bolts.
This is the rear bracket for the storage box. This will slide inside the box and be plug welded to the box wall.
It still needs a gusset on the underside and as I said earlier, will be mounted in the notch in the sub frame.
Working on box mount brackets. They hook over the sub frame and will bolt on too.
The sub frame has to be notched so the bed will lay flat. I still need to add gussets under the bracket arms.
On the right you can see the overall view of where the lockers will be situated