My COE Page 374
Back
To page 375

What you see here is an older version of a 425 Impco
Gas Mixer.
I have been attempting to hook up the linkages to get it
all working in sinc
The Flat bar that attaches to the mounting bolts on the
left is mainly there for the return spring attachment

Now if you look closely at the bronze lever you will
see a long stainless screw that will
hit on the bent flat strap when it reaches full throttle,
if the screw and strap were not there
then the butterfly would open past centre and lock up the
butterfly.

Here you see the mixer at full throttle with the
screw con acting the underside of the
bent strap, that bent strap actually goes under the
butterfly shaft otherwise it would
allow the long stainless screw to slip past it and
jamb up at full throttle, not a good idea !!