Back
My 1941 Ford COE
To Page 57

This bead came from a 38 Ford pickup Cab which was Rotten on the
bottom half, Unfortunately a Pickup is
7" Narrower then a COE Cab, So Another 2 straight sections will
need to be found to go either side of centre.
The panel below the bead was ok so a way will have to be found to
either spot weld or plug
weld from the top side, which may make it neccesary to lift the
roof off. As a new back section
is on it's way from the USA the roof will need to be cut at the
back and as it is not yet welded to
the sides it should be easy to lift it off.