Back                                                     My 1941 Ford COE           To page 59
This part of the rebuild deals with making a Pickup Door fit a COE
Three things are required 1st The top hinge position needs to be changed.
this page deals with that.

          

                  The area between the two horizontal lines will be removed and this is the section to be fitted.
                     The section on the above right  was dontated by Merle & Butch in Monroe WA  USA.
              
First the inner frame section must be fitted, I had hoped that I could just bolt the hinge in place
but Pickup inner frames are different to COE's. So the section will be cut out and replaced.


After tacking the section in place it was trial
fitted  to make sure the triple swage lined up.